Trapezoid uvs preservation

Um, the source code on the linked site is not helping? I don't know about openGL ES, but that link would have been the first link I would have posted. I'd be surprised if ES didn't support r,q coordinates.

Hi,

OpenGL ES does not work with the fixed pipe line. So I can't use glTexCoord4f.
Also, ES does not supports Quads ( Only Tri's ).
Is there a way to achieve this effect on OGL ES ?

I have read about the algorithm "[background=rgb(247, 247, 247)][font="verdana, helvetica, sans-serif"][size="2"][color="#000000"]Direct Linear Transform" but I'm not sure it is possible for a quad that built up from 2 triangles.[/font][/background]

What effect? That page is explaining how texture mapping works, also it's doing so using a quad made out of 2 triangles.

The issues you brought up are not issues at all. A texture coordinate is a texture coordinate, so even if you cannot use glTexCoord, you still have access yo vertex arrays, and whether or not you draw quads or triangles, the effect is still the same given the same coordinates.

I'm sorry, I'm confused... I have read to many resources, and I think I mixed them all.

this is the quad I defined:



SetPoints( vec3<float>(-20.0f , -10.0f, 0.0f),
vec3<float>(-10.0f , 10.0f, 0.0f),
vec3<float>( 10.0f , 10.0f, 0.0f),
vec3<float>( 20.0f , -10.0f, 0.0f) );

vTxCoords_.push_back(vec4<float>( 0.0f , 0.0f,1.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 0.0f , 1.0f,1.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 1.0f , 1.0f,1.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 1.0f , 0.0f,1.0f,1.0f));

// Populate the indices for 2 triangles
Face s;

s.uIndex[0] = 0; s.uIndex[1] = 1; s.uIndex[2] = 3;
pGeo->vFaces.push_back(s);

s.uIndex[0] = 3; s.uIndex[1] = 2; s.uIndex[2] = 1; // also try s.uIndex[0] = 3; s.uIndex[1] = 1; s.uIndex[2] = 2;
pGeo->vFaces.push_back(s);


the shader is a simple shader that uses texture2D function (texture2D( DiffuseColor, vOutTxCoords.xy ).rgb;)

I have tried the set the textCoord manually, but failed.

You're not setting the q-value of the texture coordinate as described in the link. I would say the value for the narrow part of the quad should be 0.5, not 1.0, since that part is half the size of the opposite side of the quad.

edit: The s and t coordinates need to be 0.5 as well, not only the q-coordinate.

I tried a brute force method, I denied a key for each coord of the texture ( for each vertex ), and tried to set them manually.

every combination that I do, I get a broken texture. looks like the texture is not interpolated as one quad.

(btw: how can I upload a photo to this forum ? )

If you go to the full text editor (not the one on the bottom of the thread-page; click "More Reply Options") you have the option to attach files to your post.

Well. you can easily spot the two triangles.

I have played with the textCoord of each, but I can't make them to fit right.

So what have you tried to to se the texture coordinates to? It looks like the texture coordinates you posted previously, but as I said, and as the link explained, you need to adjust the coordinates for the perspective effect.

I have tried to modified the coords as you suggested, but it did not help.

so then I decided to try the brute force, but did not make any progress on that way

Show the complete code which has the modifications I suggested.


SetPoints( vec3<float>(-20.0f , -10.0f, 0.0f), // BottomLeft,
vec3<float>(-10.0f , 10.0f, 0.0f), // TopLeft,
vec3<float>( 10.0f , 10.0f, 0.0f), // TopRight,
vec3<float>( 20.0f , -10.0f, 0.0f) );// BottomRight

vTxCoords_.push_back(vec4<float>( 0.0f , 0.0f,0.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 0.0f , 0.5f,0.0f,0.5f));
vTxCoords_.push_back(vec4<float>( 0.5f , 0.5f,0.0f,0.5f));
vTxCoords_.push_back(vec4<float>( 1.0f , 0.0f,0.0f,1.0f));


I changed the r component, to 0.

That's not the complete code. You must draw your vertex array somewhere at least.


//Setup
SetPoints( vec3<float>(-20.0f , -10.0f, 0.0f), // BottomLeft,
vec3<float>(-10.0f , 10.0f, 0.0f), // TopLeft,
vec3<float>( 10.0f , 10.0f, 0.0f), // TopRight,
vec3<float>( 20.0f , -10.0f, 0.0f) );// BottomRight

vTxCoords_.push_back(vec4<float>( 0.0f , 0.0f,0.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 0.0f , 0.5f,0.0f,0.5f));
vTxCoords_.push_back(vec4<float>( 0.5f , 0.5f,0.0f,0.5f));
vTxCoords_.push_back(vec4<float>( 1.0f , 0.0f,0.0f,1.0f));
Face s;
s.uIndex[0] = 0; s.uIndex[1] = 1; s.uIndex[2] = 3;
pGeo->vFaces.push_back(s);
s.uIndex[0] = 3; s.uIndex[1] = 2; s.uIndex[2] = 1;
pGeo->vFaces.push_back(s);
uiDrawFacesStartPos = 0;
uiDrawFacesEndPos = pGeo->vFaces.size();
//Draw
... Get/Set the attributes
unsigned int *ptr = &pGeo->vFaces[ uiDrawFacesStartPos ].uIndex[ 0 ];
unsigned int sz = (unsigned int)( uiDrawFacesEndPos - uiDrawFacesStartPos ) *3;
glDrawElements( GL_TRIANGLES, sz, GL_UNSIGNED_INT, ptr );


The shader is very basic, just use the varying textCoord in the function texture2D

diffuse = texture2D( DiffuseColor, vOutTxCoords.xy ).rgb;

if more information is needed, please update me.

tnx

Well, you haven't looked at the source code, or you haven't studied it in any depth.

The code clearly suggests (without reading the article) that the texture coordinates depend on the vertex coordinates. You just use independent values for the coordinates. I don't really understand why can't you just copy the coordinates and calculations from the source code (I know it's not a good way to learn, but et least you had something that you can experiment with).

Well I already tried that:


// Setup
// Globals
float top = .3;
float scale_texcoord = 1.f;

vTxCoords_.push_back(vec4<float>( -1.0f , -1.0f ,0.0f,1.0f));
vTxCoords_.push_back(vec4<float>( -1.0f , 1.0f ,0.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 1.0f , 1.0f ,0.0f,1.0f));
vTxCoords_.push_back(vec4<float>( 1.0f , -1.0f ,0.0f,1.0f));
SetPoints( vec3<float>( -1.0f , -1.0f, 0.0f), // BottomLeft,
vec3<float>( -1.0f , 1.0f, 0.0f), // TopLeft,
vec3<float>( 1.0f , 1.0f, 0.0f), // TopRight,
vec3<float>( 1.0f , -1.0f, 0.0f) );// BottomRight
Face s;
s.uIndex[0] = 0; s.uIndex[1] = 1; s.uIndex[2] = 3;
pGeo->vFaces.push_back(s);
s.uIndex[0] = 3; s.uIndex[1] = 2; s.uIndex[2] = 1;
pGeo->vFaces.push_back(s);
uiDrawFacesStartPos = 0;
uiDrawFacesEndPos = pGeo->vFaces.size();

//Draw
... Get/Set the attributes
unsigned int *ptr = &pGeo->vFaces[ uiDrawFacesStartPos ].uIndex[ 0 ];
unsigned int sz = (unsigned int)( uiDrawFacesEndPos - uiDrawFacesStartPos ) *3;
glDrawElements( GL_TRIANGLES, sz, GL_UNSIGNED_INT, ptr );



// Update Func
unsigned char keys[256];
GetKeyboardState( keys );
if( keys['1'] & 0x80 )
{
top += .05;
}
if( keys['2'] & 0x80 )
{
top -= .05;
}
float tx = scale_texcoord * top;
// Frist Triangle
pGeo->vGSVerts[0] = vec3<f32>(-1.0f , -1.0f, 0.0f);
pGeo->vGSVerts[1] = vec3<f32>(-top,1,0);
pGeo->vGSVerts[2] = vec3<f32>( top,1,0);
pGeo->vGSVerts[3] = vec3<f32>(1.0f , -1.0f, 0.0f);

vTxCoords_[1].x = -tx;
vTxCoords_[1].y = tx;
vTxCoords_[1].z = 0;
vTxCoords_[1].w = tx;
vTxCoords_[2].x = tx;
vTxCoords_[2].y = tx;
vTxCoords_[2].z = 0;
vTxCoords_[2].w = tx;


the above code does exactly the same as the tutorial.

you can see on the attachment the result I got.

I have noticed that GL_PERSPECTIVE_CORRECTION_HINT is not available at ES.

maybe its the way I'm drawing may tri's ?

Hmmmm. Is your texture a 8x8 checked texture?
If you, we should see a 16x16 checked texture stretched onto the trapezoid. But the texture is totally off, but the coordinates you specify look okay.

I don't see the problem but I don't think GL_PERSPECTIVE_CORRECTION_HINT has to do anything with that.

Yes, it was 16x16.

I replaced it to 8x8.

hmmm... all looks the same ( beside the GL_QUAD thing ), I'm very lost in here